Quote now

Tensile Adhesion Tester NOVOTEST AC-4624

Pull-off type adhesion tester is designed for measuring of adhesion value of paints and other coatings on base and between layers or cohesive materials. Tensile Adhesion Tester NOVOTEST AC-4624 is manufactured in compliance with EN13144 and ISO4624, ISO16276-1.
The testing with mechanical tensile adhesion tester AC-4624 is performed in the following way. On the testing cover is glued dolly and after that, it is pulled-off with the spring-system of the device. The force which is applied for pulling-off the glued dolly, is displayed in numerical value by the indicator on scale of the device. This value – is the value of adhesion.

 

Brochure of Tensile Adhesion Tester NOVOTEST AC-4624.pdf

  • Simple design and easy to operate, allows Adhesion tester AC-4624 to become a daily means of adhesion testing.
  • Using glue with fast curing base allows user to make tests in shorter time frame.
Breakout force, kg 200
Diameter of base dolly, mm 15,1 (№ 1) and 19,5 (№ 2)
Specific breakout force, MPa
  • Dolly №1 up to 10 MPa (100)
  • Dolly №2 up to 6 MPa (60)
Scale, MPa 1 (№ 1) and 2 (№ 2)
Weight of adhesion tester, kg, no more  1
Dimensions of adhesion tester, mm 150×70
Dimensions of package, mm L180*W150*H100

 

Operating manual of Tensile Adhesion Tester NOVOTEST AC-4624.pdf

  • Dollies
  • Holesaw (cutter) for cutting area of testing
  • Two-component epoxy adhesive
  • CA glue
  • Adhesion tester
  • Dollies: № 1 – 3 pcs., № 2 – 3 pcs.
  • Holesaw (cutter) for cutting area of testing
  • Two-component epoxy adhesive
  • CA glue
  • Operating manual
  • Case

Tensile Adhesion Tester NOVOTEST AC-4624. Video review