Updated and improved coating thickness gauge is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various probes make it possible of non-destructive testing of protective coatings with a wide thicknesses range.
Coating thickness gauge for measuring the thickness of various coatings on metals is very and ready to use right out of the box, and does not require special user skills. The minimum number of buttons and an intuitive menu makes it an ideal device of operational non-destructive measurement of the thickness of almost any coating with high accuracy.
Coating thickness knife tester measures the thickness of single and multi-layer coatings on both metallic and non-metallic surfaces by cutting a notch and using a portable microscope for measurement.
The precision measuring comb, made of corrosion-resistant stainless steel, is designed to accurately measure the wet film thickness of various coatings immediately after application using its notched edges.
Pencil-Type probe for coating thickness gauge is designed for precise measuring the thickness of electroplated (zinc, chrome) and dielectric (lacquer, paint, polymers, etc.) non-magnetic coatings on small steel parts. This probe provides high accuracy even on thin coatings, making it ideal for industrial applications, construction, and laboratory research.
Recommended use: this specialized probe is designed for measuring the thickness of zinc, chrome, and other electroplated coatings on fasteners and other parts with dimensions of just a few millimeters or less. If the objects being measured are not as small, we recommend using the F-0.5 probe, which is more convenient to use and has a slightly wider measurement range.
Probe type | F-0.3 probe |
Coating thickness range | 0-300 µm/0.3 mm |
Measurement accuracy | ±(3% + 1 µm) |
Substrate’s type | Steel (ferromagnetic) |
Coating type | Electroplated coatings: zinc, chrome, etc.
Paint |
Measurement method | Magnetic induction |
Typical application | Specialized probe for measuring zinc, chrome, paint on small parts, such as fasteners |
Probe dimensions | Ø10×108 mm |
Pencil-type design for hard-to-reach places and other special tasks.
The F-0.5 is the most commonly used probe, designed for measuring the thickness of electroplated coatings (such as zinc, chrome, and others), as well as paint (and other dielectric) coatings on magnetic substrates. This probe is ideal for measuring the thickness of zinc, chrome, and other electroplated coatings.
It can also be used for measuring the thickness of paint, polymer coatings, and any other dielectric coatings. It’s the best choice if you need to measure relatively thin coatings (up to 500 µm) on steel substrates.
Probe type | F-0.5 probe |
Coating thickness range | 0-0,5 mm/0-500 µm |
Measurement accuracy | ±(3% + 1 µm) |
Substrate’s type | Steel (ferromagnetic) |
Coating type | Electroplated coatings: zinc, chrome, etc.
Paint |
Measurement method | Magnetic induction |
Probe dimensions | Ø15×48 mm |
Typical application | Specialized probe for measuring zinc, chrome, paint on normal and big parts |
Widely used high precision probe suitable for many of coating thickness measurement tasks especially related to the measurement of galvanic coatings.
The F-2 is the most commonly used probe, designed for measuring the thickness of paint, polymer and other dielectric coatings on magnetic substrates. F-2 is the main probe for measuring the thickness of dielectric coatings on steel substrates, primarily paint coatings, polymer materials, bitumen, and mastic coatings.
The best choice if you need to measure coating thickness in the mid-range (up to 2 mm/2000 µm) on steel substrates, without the requirement to measure electroplated coatings.
Probe type | F-2 probe |
Coating thickness range | 0-2 mm/0-2000 µm |
Measurement accuracy | ±(3% + 2 µm) |
Substrate’s type | Steel (ferromagnetic) |
Coating type | Paint and other anti-corrosion coatings |
Measurement method | Magnetic induction |
Typical application | Paint and other anti-corrosion coatings
Measurement of thin fireproof coatings |
Probe dimensions | Ø19×59 mm |
Widely used probe suitable for most of coating thickness measurement tasks with fast measurement speed.
Probe for measuring the thickness of thick paint, polymer, and other dielectric coatings on magnetic substrates. Recommended application: measuring the thickness of fairly thick dielectric coatings on steel substrates.
Mainly fire protection, polymer material coatings, bitumen, and mastic coatings. The best choice if you need to measure coating thickness over a wide range (up to 5 mm) on steel substrates.
Probe type | F-5 probe |
Coating thickness range | 0-5 mm/0-5000 µm |
Measurement accuracy | ±(3% + 2 µm) |
Substrate’s type | Steel (ferromagnetic) |
Coating type | Fairly thick dielectric coatings on steel substrates |
Measurement method | Magnetic induction |
Typical application | Fire protection, polymer material coatings, bitumen, and mastic coatings
Paint |
Probe dimensions | Ø22×60 mm |
Widely used probe suitable for most of thick coating thickness measurement tasks on ferrous substrates.
Probe for measuring the thickness of paint, polymer, and other dielectric coatings on non-magnetic substrates. Recommended application: main probe for measuring the thickness of dielectric coatings on non-magnetic substrates. Mainly paint coatings, polymer material coatings, bitumen, and mastic coatings.
The best choice if you need to measure coating thickness in the mid-range (up to 2 mm) on non-ferromagnetic substrates.
Probe type | NF-2 probe |
Coating thickness range | 0-2 mm/0-2000 µm |
Measurement accuracy | ±(3% + 2 µm) |
Substrate’s type | Non-ferromagnetic (colored metals and alloys, stainless steel) |
Coating type | Paint, polymer, and other coatings |
Measurement method | Eddy current |
Typical application | Paint, polymer, and other coatings on colored metals and various non-magnetic alloys. |
Probe dimensions | Ø14×53 mm |
Fast measurement speed probe for non-ferrous substrates.
M-12 probe for measuring the thickness of thick polymer and other dielectric coatings on any metals (magnetic and non-magnetic) with a very wide range and moderate accuracy. Recommended application: main probe for measuring the thickness of dielectric coatings on gas and oil pipeline systems.
Mainly polymer material coatings, bitumen, and mastic coatings. The best choice if you need to measure coating thickness in a large thickness range (up to 12 mm) on any metal substrates with a single probe.
Probe type | M-12 probe |
Coating thickness range | 0-12 mm/0-12000 µm |
Measurement accuracy | ±(3% + 0.02 mm) |
Substrate’s type | Steel (ferromagnetic)
Non-ferromagnetic (colored metals and alloys, stainless steel) |
Coating type | Polymer material coatings, bitumen, mastic, fire-protective coatings
Paint |
Measurement method | Eddy current |
Typical application | Thickness measurement of dielectric coatings on gas and oil pipeline systems |
Probe dimensions | Ø18×55 mm |
Widely used fast measurement speed probe with ability to measure coatings on magnetic ferrous and non- ferrous substrates.
M-30 probe for measuring the thickness of very thick polymer and other dielectric coatings on any metals (magnetic and non-magnetic) with a very wide range and moderate accuracy. Recommended application: specialized probe for measuring the thickness of very thick dielectric coatings on gas and oil pipelines.
Mainly polymer material coatings, bitumen, and mastic coatings. Necessary when the range of standard thick coating probe M-12 (up to 12 mm) is insufficient and there is a need to measure coatings up to 30 mm thick on any metals.
Probe type | M-30 probe |
Coating thickness range | 0-30 mm/0-30000 µm |
Measurement accuracy | ±(3% + 0.03 mm) |
Substrate’s type | Ferromagnetic (steel)
Non-ferromagnetic (colored metals and alloys, stainless steel) |
Coating type | Mainly polymer material coatings, bitumen, and mastic coatings |
Measurement method | Eddy current |
Typical application | Thickness measurement of dielectric coatings on gas and oil pipeline systems |
Probe dimensions | Ø24×51 mm |
Probe for wide coating thickness range testing with ability to measure coatings on magnetic ferrous and non- ferrous substrates.
M-60 is the specialized probe for measuring the thickness of ultra-thick polymer and other dielectric coatings on any metals (magnetic and non-magnetic) with a very wide range and moderate accuracy.
Probe type | M-60 probe |
Coating thickness range | 0-60 mm/0-60000 µm |
Measurement accuracy | ±(3% + 0.05 mm) |
Substrate’s type | Ferromagnetic (steel)
Non-ferromagnetic (colored metals and alloys, stainless steel) |
Coating type | Mainly polymer material coatings, bitumen, and mastic coatings |
Measurement method | Eddy current |
Typical application | Measuring very thick specialized coatings on any metal substrates |
Probe dimensions | Ø40×76 mm |
Probe with ability to measure thick coatings on magnetic ferrous and non- ferrous substrates.
DSh probe for measuring surface roughness (surface profile) before painting operations (after shot blasting and sandblasting). Additionally, the probe can be used to measure surface defect parameters, such as the depth of pitting and localized corrosion.
Probe type | DSh probe |
Coating thickness range | 0-0.3 mm/0-300 µm |
Measurement accuracy | ±(3% + 2 µm) |
Substrate’s type | Any |
Measurement method | Eddy current |
Typical application | Measuring surface roughness and surface defect parameters |
Probe dimensions | Ø20×50 mm |
High measurement accuracy and stability probe.
DT probe for measuring surface and air temperature. Together with the DTVR probe, it allows to evaluate the possibility of painting the surface under current environmental conditions.
Probe type | DT probe |
Temperature range | -50 to +80 °C |
Measurement accuracy | ±2 °C |
Substrate’s type | · Any |
Typical application | · Measuring surface and air temperature |
Probe dimensions | Ø12×107 mm |
Fast measurement speed probe with wide range of applications.
DTVR probe for measuring air temperature and humidity, as well as calculating the dew point temperature before painting operations. With this probe, combined with a coating thickness gauge, user can easily determine whether it is suitable to proceed with surface painting at the moment.
Temperature range/accuracy | -50 to +80 °C / ±1 °C |
Humidity range/accuracy | 0 to 100% / 5% |
Dew point range/accuracy | -15 to +40°C / ±1 °C |
Probe dimensions | Ø50×111 mm |
3 in 1 probe with wide measurement ranges and high measurement accuracy and stability.