Combined Hardness Tester NOVOTEST T-UD3

$2,145.00

Combined hardness tester combines two methods of measuring hardness: Ultrasonic Contact Impedance (ASTM A1038) and Leeb (ASTM A956). This makes the device the most versatile portable device as it can be.

 

UCI probe load: +$450.00*

Leeb probe type:*

Probes accessories +$250.00

Hardness test blocks:

Total: $1,375.00

NOVOTEST Lab is your real laboratory in your pocket! Optionally with T-UD3 (Lab) model only!

 

Do hardness measurements, calibrate the device, set up a convenient display of values, save the results of hardness measurements, synchronize the archive with your other devices and a PC, transfer measurement results to your colleagues – all this is available with your smartphone thanks to the special NOVOTEST app for Android.
Hardness testers have never had such opportunities! Using a Bluetooth connection, your smartphone connects to the hardness tester and you have a completely new device – a new generation hardness tester! The intuitive interface, ample opportunities for documenting results, Internet access, touch screen, camera, microphone and GPS receiver of a smartphone turn your hardness tester into something completely unique and previously inaccessible.

More info about NOVOTEST Lab

With NOVOTEST Lab App you are able:

– setting and calibration of the hardness tester;

– display of measurement results in real time in numerical form with the construction of a graph, histogram or statistics;

– take a picture of the test object with the puting of hardness marks;

creation of a video of the controlled product;

– recording audio notes fro the tested object;

– automatic saving of measurement geolocation on Google maps;

– displaying a Google map with markers of places of measurements made on it and the ability to view these measurements;

– displaying the calendar of measurements (presentation of the archive in the form of measurements grouped by date);

– formation of the final comprehensive report on the measurement;

– sending a finished report to e-mail, messenger (or in any convenient way) directly from the application;

– flexible structure of the archive of measurements – completely similar to the usual explorer, with the ability to create folders and files with any names;

– synchronization with PC and other smartphones;

– cloud service for storing the archive of measurements;

– automatic and manual synchronization of cloud measurement archives between devices;

– launching the Google navigation mode, building a route and accompanying to the point at which the measurements were made

– the ability to store archives of other devices with Bluetooth in one application.

The main advantages of the Combined Hardness Tester NOVOTEST T-UD3:

ABILITY OF CONNECTING BOTH METHODS PROBES WITHOUT TURNING OFF THE DEVICE

The user can measure the hardness of completely different metal products of different shapes, structures, materials and the degree of surface preparation with same unit, just replacing probe.

SMALL PARTS MEASURING

Using the UCI, the operator can measure small products, we recommend parts weighing from 100 gr and a thickness from 1 mm, and when using the UCI Probe Test Stand NOVOTEST, even thinner.

COMPLEX SHAPE PRODUCTS MEASURING

Also, with the help of the ultrasonic probe, the user will be able to solve the tasks of measuring the hardness of grooves, surfaces of small radius, inaccessible places and products of complex shape.

SMALL IMPRINT OF UCI TYPE PROBE

Due to the fact that the UCI probe has a penetration depth of only a few microns, it becomes possible to work with products with high print requirements (the maximum non-destructive method is required), as well as measure the hardness of hardened layers, such as nitriding and cementation.

MEASURING PARTS WITH BAD SURFACE

Using a dynamic probe (Leeb probe), the user can test the hardness of massive products with poorly prepared surfaces. The method also allows to measure products with a coarse-grained structure without a significant dispersion of measurements.

CALIBRATED FOR DIFFERENT MATERIALS AND SCALES

Thanks to the presence of built-in calibrations of the Leeb probe for various materials and scales, the device becomes a universal tool for measuring hardness for most common metals.

BUILT-IN CAMERA

The device has a built-in camera, which allows the user to store a measurement archive of images of the tested objects with binding of hardness to a specific place on the product.

Combined Hardness Tester NOVOTEST T-UD3 can be used with special soft for operate with saved archive of measurements. Or each saved recording cab be printed throug wireless printer that can be additionaly completed with the device.

  • Small indenter imprint (suits for mirror surfaces of shafts necks, blades, gear teeth, etc.)
  • Measuring surface hardened layers hardness
  • Wide range of hardness testing
  • Various measurement modes
  • 88 combinations of materials and hardness scales (calibrations)
  • Calibration of any scale in any range
  • Convenience and ease of measurement
  • Optimized number of buttons
  • Large full-color graphic display with bright backlight
  • Built-in photo camera for thorough reports
  • Automatic probe types recognition
  • Connected probe types indication
  • The calibrations are stored in UCI probe memory
  • Extended operating temperature range (frost, down to – 40°C)
  • Internal memory and communication with a PC
  • New intuitive menu with tips on the buttons
  • Optional wireless mini printer
  • Waterproofed housing
  • Rubber bumper protected housing
  • Internal clock
  • Hardness value measuring for any mass products with more than 1 mm  thickness (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness testing of metal coatings, etc.)
  • Different operating modes:
    • Graph – the graph building mode
    • Histogram – the histogram building mode
    • Statistics – provides statistics for the current set of measurements
    • Smart – filters the incorrect measurements
    • Signal – displays the probe signal (only for the Leeb probe)
UCI probe types
  • 1kgf (10N) 2.2 lbf
  • 5kgf (50N) 11lbf
  • 10kgf (98N) 22lbf
Leeb probe types
  • D
  • DC
  • DL
  • C
  • D+15
  • E
  • G
Measuring range
  • HRC:20~70
  • HB:90~650
  • HV:230~940
  • Tensile strength, MPa: 370~1740
  • User calibrations for any range (for example: HV100-3000)
Measuring accuracy
  • HRC: 2HRC
  • HB: 10HB
  • HV: 15HV
Standards
  • ASTM A1038
  • ASTM A956
  • ASTM A370
  • ISO 16859
  • ASTM E140
  • ISO 18265
  • DIN 50159
  • GB/T 34205
Indenter UCI probe – Diamond indenter
Leeb probe – Hardened ball
Measuring direction Any direction 360°
Data storage Limited only by the memory card up to 32Gb
Communication Upload data to PC and export as a spreadsheet (USB cable and software included )
Hardness scales
  • UCI probe – HRC, HB, HV, MPa
  • Leeb probe – HRC, HRB, HB, HV, HL, MPa
  • Additional custom scales for calibration
Materials
  • Ultrasonic (UCI) probe – pre-calibrated for steel
  • Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminum, bronze, brass, copper
  • Additional custom materials for calibration
Data display
  • Load applied/contact (UCI)
  • Angle (Leeb)
  • Single test result
  • Max, Min, Average of tests
  • Number of tests,
  • Deviation
  • Var. coeff.
  • Histogram, Signal and Smart Modes (Filter of incorrect measurements).
Language
  • English
  • German
  • French
  • Polish
  • Russian
    *additional languages available by request
Indication Color LCD display (320×240)
Operating environment
  • Temperature:-20°C~40°C
  • Humidity: 30%~80%R.H.
Power supply DC 4,5V (3 pcs batteries AA)
Instrument dimensions 160x75x30mm
Net weight Approx. 0.3kg (without probe)
Gross weight (package) 2kg
Package dimensions, cm 33*27*10
Battery life Approx. 10 hours.
Warranty 3 (1+2) years
Package gross weight, kg 1.8-2kg

 

  • Protective Pouch with Straps for T-UD3
  • Android smartphone or tablet (optionally with IP65) for NOVOTEST Lab App
  • Additional UCI probes:
    – UCI Probe U1 L3 (10N/HV1)
    – UCI Probe U1 L3 (50N/HV5)
    – UCI Probe U1 L3 (98N/HV10)
98N (10 kgf) Special type of probe with increased load. To carry out the measurement, it is necessary to apply a load of 10 kgf (set automatically by the probe).Low surface cleanliness requirements.
  • Heat-treated and cemented parts with poorly prepared surface.
  • Measurement on blades, on the inner surface of pipes, holes with high roughness.
50N (5 kgf) The main type of probe for solving most hardness measurement tasks. To carry out the measurement, it is necessary to apply a load of 5 kgf (set automatically by the probe).Medium surface cleanliness requirements.
  • Heat-treated and cemented parts, such as shafts, turbines, gears, teeth, welds, heat affected zones.
  • Measurement in grooves, on teeth, in grooves, on radius surfaces.
  • Measurement on the blades, on the inner surface of the pipes, holes.
10N (1 kgf) Probe with reduced load – designed to measure the hardness of products with increased requirements for the size of the print (polished, polished surfaces), to measure the hardness of thin surface hardened layers. For the measurement, a load of 1 kgf must be applied.More demanding on surface cleanliness, compared with U1 (50N).
  • Nitrided and cemented surface layers of molds, dies, dies, thin-walled parts.
  • Bearings, tooth flanks, saws.
  • Hardness measurement of thin hardening coatings.
  • Measurement on products after thorough machining.
  • Device for measuring the hardness of thin sheets NOVOTEST U1-TL
  • Additional Leeb probes:
    – Dynamic probe Type DC-R
    – Dynamic probe Type DC-R-mini
    – Leeb probe Тype D
    – Leeb probe Type DL
    – Leeb probe Type G
    – Leeb probe Type D+15
    – Leeb probe Тype C
    – Leeb probe Type E
  • Set of support rings for Leeb probe
  • Cable for Leeb probe
  • Impact bodies for Leeb probes
  • Hardness test blocks:
    For UCI probes:
    – Rockwell Hardness Test Block 25HRC (25±5 HRC)
    – Rockwell Hardness Test Block 45HRC (45±5 HRC)
    – Rockwell Hardness Test Block 65HRC (65±5 HRC)
    – Vickers Hardness Test Block 200HV (200±50 HV1)
    – Vickers Hardness Test Block 300HV (300±50 HV1)
    – Vickers Hardness Test Block 450HV (450±50 HV1)
    – Vickers Hardness Test Block 800HV (800±50 HV1)
    – Vickers Hardness Test Block 200HV (200±75 HV5)
    – Vickers Hardness Test Block 300HV (300±50 HV5)
    – Vickers Hardness Test Block 450HV (450±75 HV5)
    – Vickers Hardness Test Block 800HV (800±50 HV5)
    – Vickers Hardness Test Block 200HV (200±75 HV10)
    – Vickers Hardness Test Block 300HV (300±50 HV10)
    – Vickers Hardness Test Block 450HV (450±75 HV10)
    – Vickers Hardness Test Block 800HV (800±50 HV10)
    – Brinell Hardness Test Block 100НВ (100±25 HB 10/1000/10)
    – Brinell Hardness Test Block 200HB (200±50 HB 10/3000/10)
    – Brinell Hardness Test Block 300HB (300±50 HB 10/3000/10)
    – Brinell Hardness Test Block 400HB (400±50 HB 10/3000/10)
    – Brinell Hardness Test Block 600HB (600±50 HB 10/3000/10)
    For Leeb probes:
    – Leeb Hardness Test Block 530±40 HLD
    – Leeb Hardness Test Block 630±40 HLD
    – Leeb Hardness Test Block 790±40 HLD
    – Leeb Hardness Test Block HLG
    *other hardness test blocks are available as well.
  • Portable grinding machine
  • Wireless printer (by request)
  • Different colors of rubber bumper protected case
  • AA batteries
  • Battery chargers
  • Transportation plastic case for hardness tester
  • Calibration certificate issued by the third-party metrology laboratory (ILAC)
  • Certificate of origin issued by the Chamber of Commerce and Industry
  • Certificate of Origin and Quality from NOVOTEST
  • CE certificate
  • Extended warranty period up to 3 years
  • Individual modification to customer requirements

“Basic” kit:

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 1pc (10N, 50N or 98N for choice)
  • Leeb D type probe – 1pc (other types by request)
  • Accessory package:
    – AA batteries – 3 pcs
    – USB charger
    – USB cable for PC
    – PC software:
    — Online – INFO/USB-connect
    — Offline – NOVOTEST USB-Connect
    – NOVOTEST LAB App for Android gadgets
    – Operating manual/Quick guide
    – Test certificate
    – Transportation plastic case

“Advanced 1” kit:  

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 1pc (10N, 50N or 98N for choice)
  • Leeb D type probe – 1pc (other types by request)
  • Protective Pouch with Straps for T-UD3
  • Hardness Test Block HRC, HB, HV (for UCI probe) – 1pc
  • Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
  • Accessory package

“Advanced 2” kit: 

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 2pc (50N+10N or 98N)
  • Leeb D type probe – 1pc
  • Protective Pouch with Straps for T-UD3
  • Leeb probe Type DL or DC-R or DC-R mini or G
  • Hardness Test Block HRC, HB, HV (for UCI probe) – 1pc
  • Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
  • Accessory package


“Advanced 3” kit: 

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 1pc (10N, 50N or 98N for choice)
  • Leeb D type probe – 1pc (other types by request)
  • Protective Pouch with Straps for hardness tester T-UD3
  • Hardness Test Block HRC or HB or HV (for UCI probe) – 3pcs
  • Leeb Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
  • Device for measuring the hardness of thin sheets NOVOTEST U1-TL
  • Set of support rings for Leeb probe
  • Accessory package  


“Professional” kit:  

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 1pc (10N, 50N, 98N)
  • Leeb D type probe – 1pc
  • Protective Pouch with Straps for T-UD3
  • Leeb probe Type DL or DC-R or DC-R mini or G
  • Hardness Test Block HRC or HB or HV (for UCI probe) – 3pcs
  • Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
  • Device for measuring the hardness of thin sheets NOVOTEST U1-TL
  • Set of support rings for Leeb probe
  • Accessory package


“Expert” kit: 

  • Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
  • UCI probe – 2pc (50N+10N or 98N)
  • Leeb D type probe – 1pc
  • Protective Pouch with Straps for T-UD3
  • Leeb probe Type DL or DC-R or DC-R mini or G
  • Rockwell Hardness Test Block 25HRC, 45 HRC, 65HRC (for UCI probe) – 3pcs
  • Brinell Hardness Test Block 100HB, 200HB, 400HB or other nominals (for UCI probe) – 3pcs
  • Vickers Hardness Test Block 200HV, 450HV, 800HV or other nominals (for UCI probe) – 3pcs
  • Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
  • Device for measuring the hardness of thin sheets NOVOTEST U1-TL
  • Set of support rings for Leeb probe
  • Accessory package

 

Other configurations of the packages are available as well.

Operation with Android Software NOVOTEST Lab for smartphones and NOVOTEST devices

NOVOTEST hardness tester in your smartphone. Special App make device smarter!

Screen Recording of hardness tester T-UD3 smartphone application

Combined Hardness Tester NOVOTEST T-UD3 with photo camera


Combined Hardness Tester NOVOTEST T-UD3. Video review

Correct UCI probe use for accurate results. UCI Hardness Tester NOVOTEST T-U3 (T-UD3)

Calibration UCI probe of Combined Hardness Tester T-UD3 

“>

Combined Hardness Tester NOVOTEST T-UD3. Leeb probe application

Operation with portable wireless printer for Hardness Tester NOVOTEST T-UD3 

Combined Hardness Tester NOVOTEST T-UD3. Display modes