Some advantages of Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST:
This special version of the thickness gauge, housed in a durable aluminum enclosure, is designed for extreme conditions where the device might be dropped or damaged. Its robust profile withstands high static and dynamic compression, allowing for “careless” use.
Some advantages of Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST:
WIDE RANGE OF THICKNESS OF TESTING PRODUCTS
Same as other ultrasonic thickness gauges TM “NOVOTEST”, Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST allows user to measure the thickness of products in a wide range with a minimum set of transducers, this is achieved thanks to the advanced settings of the device (amplification of two stages, V-correction, etc.)
UNIVERSAL TRANSDUCERS
Any dual-element probes can be connected and configured to the device by cables with standard connectors. What makes Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST universal to use, and does not limit users in choosing a probes for operation.
DISPLAY THE PRODUCT PROFILE WHEN SCAN
The device has a scanning mode of the product in the mode of a B-scan, which allows user to visualize thinning and thickening of the wall like a graph on the display of the device. This allows the user to see the product profile, which simplifies the operator’s work. Additionally, there is an alarm function for exceeding the maximum and minimum thickness limits that are pre-set by the operator.
THICKNESS SAMPLE FOR ADJUSTING THE DELAY OF THE TRANSDUCER
Like other ultrasonic thickness gauges TM “NOVOTEST”, the Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST has a thickness sample mounted on the device’s body, which allows the user to quickly set “0” (calculate the delay in the probe) when changing the transducers or the operating conditions of the device.
The device has a memory where the referencebook of the propagation velocities of the most common materials is stored, also the device allows user to save the settings of the transducers and measurement results, which can be stored both in the device and transferred to a PC using special software that is supplied with the standard Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST set.
Probe type range for steel, mm:
|
|
Probe dimensions, mm:
|
|
Dimensions of probe contact area/crystal, mm:
|
|
Optional probes:
|
|
Compatible probe types |
|
Compatibility with Active EMAT Transducer EMAT-A1 | No |
Probe calibrations (V-path, TVG, etc.) |
|
Probe cable connector type | 2 Lemo 00 |
Probe cable length, m | 1,2 |
Measurement scales |
|
Measurement resolution, mm/inch | 0.01/0.001 (0.01/0.0001 by request) |
Basic measurement accuracy, mm | ± (0,01 T+0.05) (*For range 0.8 – 300 mm) |
Gain range, dB | ± 20 |
Response time, with no more than, s | 1 |
Setting range of the ultrasonic velocity, m / s | 1000-17000 |
Preset velocities for materials | Steel (8 different grades), Aluminum, Iron, Cast Iron, Zinc, Chromium, Copper, Brass, Bronze, Silver, Gold, Nickel, Tungsten, Tin, Lead, Molybdenum, Manganese, Magnesium, Rubber, Polystyrene, Plexiglas, Capron, Caprolon, ED-5, Ebonite, Porcelain, Teflon, Textolite, Silicate Glass, Acrylic glass, User |
Operating modes |
|
Standards |
|
Body type / Dust and moisture protection level |
|
Calibration thickness block on the body | 6 mm (Steel/~6080 m/s) |
PC cable connection |
|
Wireless connection with Android gadgets via NOVOTEST Lab App | No |
Storage capacity of measurement results | 128 |
Measurement archives |
|
Menu languages | English, Spanish, Ukrainian, Russian (other languages optional) |
Operating environment |
|
Power supply | DC 3V (2 pcs standard batteries AA) |
Time of continuous work hours, not less, h | 25 |
Charging | External charger for 2pcs AA batteries |
Weight of electronic unit with batteries, no more, kg | 0.25 |
Overall dimensions, mm | 130x90x40 |
Package weight, kg | 1.5 |
Package dimensions, cm | 33*27*10 |
Documents |
|
Country of origin | Made in Ukraine (Europe) |
Warranty |
|
General comparative chart of all models NOVOTEST ultrasonic thickness gauges (without UT-3M-EMAT)
Model name | UT-2A | UT-1M | UT-1M-IP | UT-1M-ST |
Measuring thicknesses range for steel, mm | 0,4 – 1500 (depends on probe) | 0,45 – 1500 (depends on probe) | ||
Resolution, mm | 0,01 | |||
Basic measurement accuracy, mm | ± (0,01*T+0,05) | |||
Basic probes / range for steel | 2,5 MHz / 2,5 – 1000 mm 5 MHz / 0,8 – 300 mm 10 MHz / 0,45 – 75 mm |
|||
Optional probes / range for steel | 1,25 MHz / 4 – 1500 mm 2 MHz / 3 – 1200 mm High-temperature 5MHz (up to 250 °С) / 0,8 – 300 mm Echo-Echo 5MHz for through-coating measurements / 3,5 – 26 mm |
|||
Compatibility with Active EMAT Transducer EMAT-A1 |
Yes | No | ||
Compatible probe types | Dual-element Single-element |
Dual-element | ||
Operating modes | Normal A-scan B-scan Manual mode Control mode |
Normal B-scan Control mode |
||
Measurement methods | Echo Echo-Echo Peak-Peak Zero-crossing |
Echo Echo-Echo |
||
Measurement units | mm inch |
|||
Display | Color, 3,5 inch, 480*320 | Monochrome, 2,5 inch, 128*64 | ||
Menu languages | English Ukrainian Russian (other languages optional) |
English Spanish Ukrainian Russian (other languages optional) |
||
Body type/ Dust and moisture protection level |
Metal, durable /Standard for shop and field operation | Plastic, with shockproof silicone case / Standard for shop and field operation | Plastic, sealed /High – optionally water immersion up to 1m deep for 30 min | Metal, durable /Standard for shop and field operation |
Saving of the settings for different probes | Yes | |||
Compatibility with probes of other manufacturers | Yes | |||
V-path correction and TVG adjusting for the user’s probes | Yes | |||
Storage of measurement results | 7000 and more (Limited only by the memory card) |
128 | 128 | 128 |
PC cable connection (via www.novotest.info) |
Yes | |||
Smartphone Wireless connection (via NOVOTEST Lab) |
No | Optional | Optional | No |
Charger type | Any USB socket (charger adapter, PC, power bank, etc.) | External charger for batteries | Any USB socket (charger adapter, PC, power bank, etc.) |
External charger for batteries |
Battery | Built-in Li-ion | 2pcs standard АА batteries |
3pcs standard АА batteries |
2pcs standard АА batteries |
Electronic unit weight, no more, kg | 0,5 | 0,25 | 0,35 | 0,35 |
Dimensions (L x W x H), mm | 165x90x50 | 122х76х37 | 160х90х28 | 130х90х40 |
Minimum time of continuous work, h | 10 | 25 | 25 | 25 |
Operating temperature range, ° C | -20 to +40 |
– 1.25MHz probe for thickness gauge (echo) 20/2
– 2.0MHz probe for thickness gauge (echo) 20/2
– 2.5MHz probe for thickness gauge (echo) 12/2
– 5MHz probe for thickness gauge (echo) 10/2
– 10MHz probe for thickness gauge (echo) 6/2
– 10MHz probe for thickness gauge (echo) 3х2
– 5MHz probe for thickness gauge (echo-echo) 10/2 for through coating
– 10MHz probe for thickness gauge (echo-echo) 6/2 for through coating
– 5MHz high-temperature probe for thickness gauge (echo) 10/2
– 5MHz probe for thickness gauge (echo-echo) 10/2 for through coating, underwater, 10 m cable
– 5MHz probe for thickness gauge (echo-echo) 10/2 for through coating, underwater, 20 m cable
– 5MHz probe for thickness gauge (echo-echo) 10/2 for through coating, underwater, 30 m cable
Thickness nominals | Material |
1-3-5-7-10-15 mm | Steel, SS, Aluminum |
1-2-3-4-5-6-7-8-9-10-11-12-13-14-15 mm | Steel, SS, Aluminum |
2,5-5-7,5-10-12,5 mm | Steel, SS, Aluminum |
2,5-5-7,5-10-12,5-15-17,5-20 mm | Steel, SS, Aluminum |
2,5-5-7,5-10-12,5-15-20 mm | Steel, SS, Aluminum |
2.5-5-10-20 mm | Steel, SS, Aluminum |
2-3-4-5-6-7-8-9-10 mm | Steel, SS, Aluminum |
2-3-4-5-6-7-8-9-10-11 mm | Steel, SS, Aluminum |
2-4-6-8-10 mm | Steel, SS, Aluminum |
2-4-6-8-10-12 mm | Steel, SS, Aluminum |
2-5-10-15-20-25 mm | Steel, SS, Aluminum |
2-5-10-20-30-40 mm | Steel, SS, Aluminum |
3-4-5-6-7-8-9 mm | Steel, SS, Aluminum |
4-6-8-10-12-15 mm | Steel, SS, Aluminum |
5-10-15-20-25-30 mm | Steel, SS, Aluminum |
5-10-15-20-25 mm | Steel, SS, Aluminum |
5-10-15-20-30-40 mm | Steel, SS, Aluminum |
5-10-15 mm | Steel, SS, Aluminum |
5-10-20 mm, step 0.1 | Steel, SS, Aluminum |
5-10-20-30-40-50 mm | Steel, SS, Aluminum |
10-11-12-13-14-15 mm | Steel, SS, Aluminum |
10-20-30-40-50 mm | Steel, SS, Aluminum |
10-20-40-60-80-100 mm | Steel, SS, Aluminum |
0,2 mm | Steel, SS, Aluminum |
0,3 mm | Steel, SS, Aluminum |
0,4 mm | Steel, SS, Aluminum |
0,5 mm | Steel, SS, Aluminum |
0,8 mm | Steel, SS, Aluminum |
1 mm | Steel, SS, Aluminum |
1,5 mm | Steel, SS, Aluminum |
2 mm | Steel, SS, Aluminum |
3 mm | Steel, SS, Aluminum |
4 mm | Steel, SS, Aluminum |
6 mm | Steel, SS, Aluminum |
10 mm | Steel, SS, Aluminum |
15 mm | Steel, SS, Aluminum |
20 mm | Steel, SS, Aluminum |
25 mm | Steel, SS, Aluminum |
30 mm | Steel, SS, Aluminum |
40 mm | Steel, SS, Aluminum |
50 mm | Steel, SS, Aluminum |
75 mm | Steel, SS, Aluminum |
90 mm | Steel, SS, Aluminum |
100 mm | Steel, SS, Aluminum |
125 mm | Steel, SS, Aluminum |
150 mm | Steel, SS, Aluminum |
175 mm | Steel, SS, Aluminum |
200 mm | Steel, SS, Aluminum |
300 mm | Steel, SS, Aluminum |